+86 755 2106 2045

  +86-136 0016 1952



Service line


Welcome to FENGJIE

We Focus On Washroom Solutions


What\'s the quantity you need

Contact Us

Contact Us For Quote and Lighting Opinion

Let\'s start design your lighting project.

Please try to answer our following questions or call us.

1. What kind of field you need to light up? Is a new court or need to replace the old lamps?

2. If you need to replace the old lamps, what\'s your current lamps?

3. What\'s the size of your lighting field? How many poles? What\'s the height of your poles?

4. What\'s your lux request?

5. What\'s the quantity you need?

HOME >> NEWS >>Industry news >> Choosing the right soap dispenser

Choosing the right soap dispenser

Choosing the soap dispenser is easy only when you concentrate carefully on the factors of choosing the soap dispenser. Some people pay attention to the price, some pay attention to the appearance of the lack of neglect of its main function. The final product was less than satisfactory. Here are a few selection suggestions, I hope to help you.

Buy soap liquid device is not to buy a vase, beautiful appearance is a point, but some products are flashy. The interior is complex and difficult to operate. It is suggested that the best time to buy the internal structure can be opened to understand after the choice.

图层 6.png

What kind of soap dispenser is good? Safety is the first, both strong and easy to operate, now most of the ABS material. On the market, most of the belt lock type is easy to open and not easy to disperse. Once it's open, we're going to focus on the internal structure of the dispenser. In general, we open the soap dispenser to add liquid operation. However, the filling port of different soap dispensers is in different positions, and some will be set on the top of the machine. Because the liquid can only be filled from top to bottom. it can not be removed, the liquid is easy to leak to the bottom of the machine, and the probability of failure is greater. Some of them are hidden inside the machine and you need to remove them to add the liquid, but the complexity of the structure is also a problem. The disassembly and assembly process of the 1406 soap dispenser of Fengjie is very simple and convenient. All parts can be disassembled and assembled. When adding liquid, only the inner tank is removed and then the liquid is added.


Except for rehydration and the service life of the machine, most soap dispensers on the market use No. 5 battery life is not long and does not support DC. Fengjie 1406 uses a No. 2 battery and supports DC. It can stand by for a long time and can be used 30,000 times, which is far higher than other similar products.

Do not know if you have trouble in the process of using it, the general soap liquid has foam alcohol and gel. If the soap dispenser needs to be replaced, it also needs to be replaced, which greatly increases the cost. There is a soap dispenser that can solve this problem -- Fengjie 1406, Fengjie 1406 soap dispenser can replace the pump head, three different liquids for three pump heads. When the liquid needs to be replaced, as long as the pump head is removed and replaced with the corresponding pump head, convenient, fast, and low cost. In fact, not only Fengjie 1406, Feng Jie's all soap dispensers have this advantage.

If you need to buy a soap dispenser can pay attention to the Fengjie bathroom, we will give you the best advice and price, enchanted to contact us.

Factory Address:,#1-6 Shengtai Rd,Xingguang Village,Huangjiang Town,Dongguan,China

TEL :+86 755 2788 8295




Quick Link

About Us

About US





Contact Us

Site Map



E-mail :




Please enter your email address for our mailing list to keep your self our lastest updated.

Office Address: 4th Floor(W), Building A5, Xinjianxing Science &Technology Industrial Park, No. 3333 Guangqiao Road, Xinhu Street, Guangming District, Shenzhen City, Guangdong Province. China
Contact Us:
+86 755 2788 82
No content
Word 500(limit 500 Character)
seo seo